The Draco tera enterprise matrix switch can accommodate a wide range of signal formats. I/O cards can be mixed in the same frame allowing ultra-flexibility for any KVM application.

 

480-C8: I/O Card - Cat-X

The Draco tera 480-C8 card is based on 8 bi-directional ports using standard RJ-45 Cat-X interconnects.  The card is port agnostic allowing the same card to be used for either input or output connections.  Signal formats supported included DVI-I, DVI-D, HDMI, DisplayPort and VGA. Signals can be extended up to 140m.  The card is hot swappable and includes a locking tab to keep the card securely in place.

 

480-S8: I/O Card - Fiber

The Draco tera 480-S8 card is based on 8 bi-directional ports using standard duplex LC fiber optic connections. The card is port agnostic allowing the same card to be used for either input or output connections. Signal formats supported include DVI-I, DVI-D, HDMI, DisplayPort and VGA. Signals can be extended up to 10km. The card is hot swappable and includes a locking tab to keep the card securely in place. 8 SFP modules are included supporting 1310nm wavelengths

 

480-V8: I/O Card - XV Fiber

The 480-V8 card is a high speed fiber bi-directional 8 port card using standard duplex LC fiber optic connections.  The card is port agnostic allowing the same card to be used for either input or output connections. This card is recommended for applications where UHDTV (4K) video signals up to 4096x2160 are used.  8 SFP modules are included supporting 1310nm wavelengths

 

480-UNI16: I/O Card - Universal Card

The 480-UNI16 card supports specialized signal formats such as SDI and USB 3.0 requirements. The base cards allows up to 8 SFP modules to be installed as either transmitters or receivers. For SDI signals, the card can be installed with SFP Fiber or SFP mini-coax modules. Use the high-speed 6Gbps SFP modules to support USB 3.0 signals.

 

480-GRD-S8: I/O Card - Grid 8:1 Card

The new dual-port Matrix Grid board replaces the standard I/O board previously used for matrix interconnection and dramatically reduces cabling required between them. With the new board, eight grid lines that previously required eight separate duplex fibers, are established using a single duplex fiber connection.

 

480-X8: I/O Card - empty SFP cages

The 480-X8 card is a base-unit plug in card that comes without SFP modules installed. The card is recommended for applications where CWDM or as a spare parts board.  The card is port agnostic allowing the same card to be used for either input or output connections. Refer to the CWDM section for recommended CWDM SFP modules and supported wavelengths.

 

Contact Us

IHSE USA LLC.
1 Corporate Drive,
Cranbury, NJ 08512
Phone: (732) 738-8780
Toll Free: (866) 721-0744
Fax: (732) 631-0121
E-mail: info@ihseusa.com

contact us